Bauma 2007, part 4
Northern open-air ground
|Doosan DX520LC and DX340LC front shovel||Doosan DX300LC und DX420LC Demolition, both with high-reach booms|
|Doosan DX190W material handler||Midibagger Doosan 75V with road/rail equipment|
On the northern open-air ground, mostly Asian and smaller manufacturers were present. Undoubtly, Doosan, formerly known as Daewoo, was one of the largest companies in this area. They showed a vast selection of machines from their product range including high-reach demolition machines like the DX300LC and DX420LC, the DX520LC with long-reach boom or the DX340LC front shovel. But also material handler like the DX190W or special solutions like the midi excavtor 75V with tracks and additional road/rail equipment could be seen.
|Hyundai 800LC (left) and 360LC (right)|
|Takeuchi TB180FR short tail excavator||Battery powered protoype Takeuchi TB125E|
|LaBounty MSD 2000R-SL mounted on Liebherr A934C (left) and MSD 4500R (right)|
Two more Asian manufacturers were Hyundai and Takeuchi. Hyundai too showcased a large range of products including medium sized tracked excavators like the 360LC as well as the 80 tonnes excavator 800LC-7A.
In contrast, Takeuchi showed their well-known small and midi excavators, for example the biggest one, the TB180FR or a prototype of the battery powered TB125E. This machine is supposed to work for 6–8 hours with on set of lithium ion batteries and be able do the same work as an conventionally powered machine of the same size. The machine is targeted for working sites, where the noise or exhaust fumes of combustion engines are not tolerable.
One of the non-Asian companies wasLaBounty, who presented their scrap shears on their booth, for example the four tonnes weighing MSD 2000R-SL with new “Saber Lube” jaw lubrication system, mounted on a Liebherr A934C or the nine tonnes shear MSD 4500R with 2,300 tonnes of shear force.
Aside from that, various other manufacturers were present on the northern open-air ground, some of which are represented in the following pictures.
|Bergmann 3012 three-way tipper with 12 tonnes of payload and rotating operator’s place||Dressta TD-15M dozer (left) and SB-60 pipelayer (right)||Quaint: pneumatic spades|
|Walking excavators: Euromach 95 (far left), Kaiser S3 with tracks (left) and Menzi-Muck A111 (right)||Gehl compact loaders 6640 and 5640 with mixing buckets|
|Attachment claw with tiltrotator||Dust-free soil stabilizing by Stehr with combined lime layer and cutter in one machine||Prototype of a combined excavator and loader by Sunward||Terrain-Leveler 1255 by Vermeer for milling rock surfaces|